Our HanStone Quartz product line is ideally suited for countertops, vanities, bar tops, reception areas, conference rooms and other surfaces throughout residential and commercial interiors. Combined with nature’s hardest materials, natural quartz, with high-quality polymer resin and pigment to produce a durable yet luxurious stone surface. All of these qualities have made HanStone Quartz a premier choice for builders throughout the world.
HANSTONE QUARTZ COUNTERTOP MAINTENANCE
HanStone Quartz is easy to maintain. It is a non-porous material that is highly resistant to stain, scratches and heat. However, it is not stain, scratch, or heat proof. Follow the proper care and maintenance recommended by your professional HanStone Quartz distributor or installer to keep the HanStone Quartz surface beautiful for many years.
Routine Care & Maintenance
Simply clean with soap and water on a regular basis to keep the lustrous gloss and radiant sheen. Use warm water and a damp cloth with a small amount of non-abrasive cleaner that does not contain bleach.
HanStone’s new Velour finish (available only in the color Aramis) will show more signs of daily use. As a result, the Velour finish will require more frequent cleaning and daily maintenance than other HanStone polished finishes.
Although HanStone Quartz is resistant to stain, spills should be cleaned as soon as possible. Liquid spills and stains from fruits, vegetables, or other foods should be wiped up and cleaned with soap and water.
Preventing Damages
HEAT – HanStone Quartz is designed to be resistant to heat and can withstand exposure to normal cooking environment for brief periods of time without being damaged. Although HanStone Quartz withstands heat better than most surfacing materials on the market, all surfacing materials, including stone, can be damaged by extreme temperature changes, whether prolonged or sudden. Trivets and hot pads should always be used when placing hot skillets, pans, crock-pots or other heat generating kitchenware on the HanStone surface.
SCRATCHES – HanStone Quartz’s durable surface is designed to withstand normal use. While it is resistant to scratches, cuts, and chipping, cutting directly on the quartz surface should be avoided. Using cutting boards and taking care not to drop or move heavy objects on the surface will help to ensure long-lasting beauty.
CHEMICALS – Avoid exposing HanStone Quartz to any strong chemicals and solvents. It is important to note that some of these chemicals and solvents can be found in household items like paint removers, paint and stain strippers that contain trichlorethane or methylene chloride, nail polish removers, bleach, furniture cleaners, oil soaps, permanent markers or inks, and chemicals with high alkaline/PH levels (oven cleaners, drain openers, etc.). Avoid using cleaning products that contain oils, powders or abrasives.
CHEMICALS TO AVOID – The below list of chemicals should be avoided with HanStone Quartz; however, the below list is not a complete list, and there may be other chemicals not listed here that may damage HanStone Quartz. The effect of any chemical usage on HanStone Quartz is ultimately dependent on the type of chemical, the length of exposure, and the degree of concentration.
Oil soaps, bluing agents, dyes, stains, paint thinner or strippers.Solvents such as acetone, nail polish remover, lacquer thinner, or bleach (short-term exposure at 50% dilution may be acceptable for purpose of cleaning difficult stains-based on removing and rinsing applied area immediately).Chlorinated solvents such as trichloroethylene or methylene chlorideBenzene, toluene, methyl ethyl ketoneConcentrated acids such as hydrocyanic acid, hydrofluoric acid, hydrochloric acid, sulfuric acid, nitric acid.Chemicals with high alkaline/PH levels (pH > 10)
**If any of the substance listed come into contact with HanStone Quartz, rinse with plenty of water and follow routine cleaning procedures immediately.
Although long-term or frequent exposure must be avoided at all times, the following products may be used with short-term exposure (removing and rinsing immediately after application with water) to clean difficult stains or residues. Always handle such cleaning agents with care and rinse the applied surface with water completely afterwards.
Recommended cleaners:
Simple Green10x Stone Polish
Magic Eraser by Mr. Clean Soap and Water
Denatured Alcohol
Hopes Surface cleaner
Rock Doctor cleaner
**All products must have all excess removed immediately after application with water and cloth. Prolonged exposure may ruin the surface of the slab.**
Removing Difficult Spills
On stubborn or dried spills where routine cleaning procedures do not work, use a non-abrasive cleaning pad along with the following recommended cleaners:
If gum, nail polish, paint, or other substances are accidentally allowed to adhere to the surface, they can be removed with the use of a plastic scraper or putty knife to gently scrape off the substance and by following routine cleaning procedures.